Products from Kenton Electronics

Usually overseen in a sea of bright shining boxes, there is no MIDI conversion, interfacing or problem solving that Kenton hasn't invented. Your most trustful helper in all things MIDI.

Close filters
from to
  •  
 
1 From 2
No results were found for the filter!
120747_1 Kenton - 8pin Jones to 3×3.5mm (f. EMS Synth,...
This special cable allows for connecting your Kenton MIDI/CV interface to your EMS synthesizer by only one cable!
€69.00 *
Net price: €57.98

Pre-order - Delivery date t.b.d.
 

120731_1 Kenton - cable for ProSOLO: DIN Sync - 2 x 3,5mm
Cable for Kenton Pro Solo. MIDI-jack to 2x 3,5mm jacks. The cable allows to use two further CVs (Aus 2 3) instead of the MIDI-Thru socket.
€13.00 *
Net price: €10.92

In stock
 

120744_1 Kenton - DIN Sync Splitter
Splitter cable for making two DIN-Sync signals out of one. For example to synchronise two TB-303s to one TR-808.
€11.00 *
Net price: €9.24

In stock
 

120725_1 Kenton - LD2 Pro (Level Display)
Mainly intended as a MIDI volume level indicator where high visibility is needed. the LD2 displays the level both numerically 0 - 127, and on a 20 segment bargraph. The LD2 isn't restricted to displaying volume only however, it can...
€165.00 *
Net price: €138.66

Pre-order - Delivery date t.b.d.
 

120727_1 Kenton - LNDR (Line Driver)
LNDR is a master and slave pair that allows MIDI to be sent accurately in both directions at the same time, across distances of over 500 metres (1640 feet) using a standard network cable (CAT5 cable). This is over 33 times the distance...
€155.00 *
Net price: €130.25

In stock
 

120729_1 Kenton - MIDI USB Host
USB host-to-MIDI converter for "class compliant" USB MIDI devices. It provides MIDI In and Out sockets for USB MIDI keyboards and controllers which have only a USB B type socket. In this way USB-MIDI controllers can be connected not only...
€122.00 *
Net price: €102.52

In stock
 

120732_1 Kenton - Pro 2000 MkII
This Super-fast response time Midi to CV/Gate Converter has a MIDI syncable LFO(s) MIDI IN/THRU, MIDI analyser mode, Portamento, Selectable note priority, Set-ups stored in non-volatile RAM, Two completely independent CV channels, six...
€485.00 *
Net price: €407.56

Pre-order - Delivery date t.b.d.
 

120736_1 Kenton - Pro 2000 rack ears
Rack ears for the Kenton Pro 2000 MIDI-CV converter.
€49.00 *
Net price: €41.18

Pre-order - Delivery date t.b.d.
 

120737_1 Kenton - Pro DCB Mk3 (with 14-pin DCB cable)
The Kenton Pro DCB is a very comprehensive, fully programmable interface for MIDI-fying your Roland Juno 60 (and some Jupiter 8s) by the use of their DCB interface socket. It comes with a cable with a 14 pin connector which works with...
€249.00 *
Net price: €209.24

In stock
 

120743_9 Kenton - rackmount kit for MIDI Stream
The kit not only allows for mounting the Kenton MIDI Stream into a 19" rack, it also features two antenna connectors in the front for better reception.
€69.00 *
Net price: €57.98

In stock
 

130192_1 Kenton - SYNC-5 (DIN Sync Splitter)
Small unit for active splitting of an incoming DIN-Sync signal to five DIN-Sync outputs.
€89.00 *
Net price: €74.79

In stock
 

120741_1 Kenton - USB SOLO
The USB-SOLO converts MIDI from your computer data into CV- gate, sync and clock signals. The operation is easy and clear, settings can be saved in non-volatile memory. 1V/oct and Hz/V characteristics are possible as well as normal gate...
€210.00 *
Net price: €176.47

Pre-order - Delivery date t.b.d.
 

1 From 2
Viewed