Multiples & Converters

Multiples are signal splitters that can be used to distribute CV or gate signals to multiple targets, e.g. a gate signal triggers three envelopes simultaneously. Although it is theoretically possible, these modules are not suitable for mixing signals. For quantized CVs such as sequences to be distributed to oscillators, active (buffered) multiples are recommended, which provide electronically exact copies of the signal at each output socket. The reason for this is that with passive multiples, all signal receiving modules affect the voltage on the other output sockets and therefore slightly different voltages are applied to the target modules, which can lead to tuning problems. For gate/trigger and modulation signals this is usually negligible.
Multiples are signal splitters that can be used to distribute CV or gate signals to multiple targets, e.g. a gate signal triggers three envelopes simultaneously. Although it is theoretically... read more »
Close window
Multiples & Converters
Multiples are signal splitters that can be used to distribute CV or gate signals to multiple targets, e.g. a gate signal triggers three envelopes simultaneously. Although it is theoretically possible, these modules are not suitable for mixing signals. For quantized CVs such as sequences to be distributed to oscillators, active (buffered) multiples are recommended, which provide electronically exact copies of the signal at each output socket. The reason for this is that with passive multiples, all signal receiving modules affect the voltage on the other output sockets and therefore slightly different voltages are applied to the target modules, which can lead to tuning problems. For gate/trigger and modulation signals this is usually negligible.
Close filters
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
  •  
  •  
 
1 From 3
No results were found for the filter!
170276_1 1010 Music - MX4 Buffered MIDI Multiple
Compact MIDI splitter – With the MX4, users can send MIDI data from a keyboard or sequencer to up to four instruments and effect units. Input and outputs are configured as 3.5 mm jack connectors. Thanks to the included adapters, devices...
€96.50 *
Net price: €83.19

In stock

170318_1 1010 Music - Toolbox
The Toolbox features four rhythm sequencers, four polyphonic note sequencers and four function generators. The latter divide into three LFOs and a CV modulation sequence. Handling the module is easy as pie, thanks to several knobs and...
€583.90 *
Net price: €503.36

In stock

190028_1 4ms Listen 4
The 4ms Listen Four is a four-channel stereo mixer with line / modular and headphone outputs. If the four stereo channels are not enough, multiple Listen Four modules can be daisy-chained together to form a large mixer setup with sub-mix...
€193.01 *
Net price: €166.39

In stock

170327_1 ACL - Multi II
ACL’s Multi II consists of an active and a passive signal distributor. The buffered multiple features a normal and an inverted input, followed by a mixer. Results are emitted via five outputs. The non-buffered multiple comes equipped...
€95.53 *
Net price: €82.35

In stock

170004_1 AJH Synth - MiniMod Gain Switch Expander /...
AJH’s Gain Switch Expander / Multiple relocates the gain functions of Minimod VCF and VCA to the front of your modular system. Normally, these parameters can only be edited via jumpers on the circuit board of the modules. In detail, the...
€86.76 *
Net price: €74.79

Available shortly

170007_1 AJH Synth - V-Scale Active Multi
The V-Scale Active Multi is a buffered precision multiple with one input and five outputs. Thanks to its high input impedance (20 MOhm), low output impedance and a DC voltage offset of less than 0,003 volt this module is an excellent...
From €116.00 *
Net price: €100.00

In stock

120236_1 Analogue Systems RS-170 Multiples
Classic multiples module for splitting signals, e.g. for sending one modulation to different destinations. It contains two passive five-way multiples.
€63.36 *
Net price: €54.62

In stock

120241_1 Analogue Systems RS-230 CV Buffer
The CV Buffer is a dual active multiples. With this module you can split signals without level loss. Besides that each unit has an inverted output so an inverter is included, too!
€95.53 *
Net price: €82.35

In stock

120245_1 Analogue Systems RS-270 Converter
This passive module is a handy converter between different connector formats: 6.35mm jack (1/4"), 3.5mm jack (1/8"), and phono (alias`RCA` or `cinch`) at channels 3 and 4.
€77.01 *
Net price: €66.39

In stock

130561_1 CG-Products - PCV1
The Patch Converter 1 alias PCV1 helps you to use your bananafied modular system together with Eurorack. Or vice versa.
€48.74 *
Net price: €42.02

In stock

180214_1 CG-Products - PCV2
With the PCV2, you can combine modular systems with varying types of connectors. The module is equipped with six banana sockets, which are wired to five mini jack connectors and one 1/4 inch jack connector. Thanks to the PCV2’s passive...
€48.74 *
Net price: €42.02

In stock

130562_1 CG-Products - PCV3
The PCV 3 (alias Patchconverter 3) converts from minijack to 1/4" jack to banana. Interesting for people with several different modular systems, disliking pesky adapter cables.
€58.49 *
Net price: €50.42

In stock

1 From 3
Viewed