Prices incl. VAT plus shipping costs
- Order number: 190249
Flexible ADSR envelope with voltage control of decay and release times. Interesting hold and repeat functions turn the envelope into a LFO with gating functions. Among the ADSRs the RS-60N module still is among the most versatile, natural sounding and highly recommended!
Thanks to a new front panel and bus concept, this version of the RS-60 is fully compatible to Doepfer-style Eurorack systems.
Classic ADSR type envelope generator. Decay and release times can be voltage controlled via a common input for positive CVs between 0 and +10V. Time ranges of the segments: Attack: 0,5mS to 10S; Decay: 2,5mS to 20S; Release: 2,5mS to 20S.
Two switches affect the behaviour of the RS-60N in nine different ways:
- STD/STD: Normal ADSR mode. A gate triggers and holds the envelope up to the release phase.
- HOLD/STD: hold will hold the envelope at sustain level. Signals in the gate input have no effect. A signal at the Trig/Retrig-In restarts the AD phase and keeps the envelope at sustain level until the next trigger.
- ONESHOT/STD: Press the swithc into oneshot position and you´ll fire the envelope once. trigger signals at the Trig-Retrig-In will restart th envelope only when oneshot switch is pressed.
- HOLD / GATED REPEAT and HOLD / AUTO REPEAT have the same effect. Attack and decay phases will be repeated and the module acts as a LFO. Rate is dependent on the A/D times and range from 0.003Hz to 300Hz. A gate at the Trig-Retrig-In holds the signal at +10V, without gate the LFO continues cycling.
- STD / GATED REPEAT: The envelope will onbly be looped when a gate signal is present at the Gate-Trig-in
- STD / AUTO REPEAT: A gate at the Trig-Retrig-In holds the signal at +10V, without gate the LFO continues cycling.
- ONE SHOT / GATED REPEAT and ONE SHOT / AUTO REPEAT have the same effect. the oneshot switch generates a gate and fires the envelope. A gate at the Gate-Trig-in will hold the envelope at +10V, without gate the envelope will be looped.
The envelope signal is present at two outputs A and B and it´s level can be controlled and inverted with a potentiometer.
Similar to MakeNoise´s Maths you can influence the curve of the envelope by feedbacking it: connect the positive output with the CV input for decay/release; the stronger the modulation the shorter, more exponential and punchy the envelope gets.
|Power consumption -12V:||24|
Starting almost in parallel with Doepfer, Bob Williams established back in 1998 his own modular system with fine circuits reminiscent of the British tradition initiated with EMS in the 1970s. Despite offering initially a different power connector and panel width standard (which left a 1,5HP gap), all modules bearing the "N" on their names are adapted to work seamlessly with most eurorack cases. Still, it is worth checking the depth of your case.